| Flying gear |
| SuperSkids™ Brand Landing Gear SuperSkids400™Landing Gear SuperSkids™ 3D SuperBoom Spare parts for SuperSkids SuperGrips SuperPack LITHIUM POLYMER CHARGER SuperPad R/C Telemetry |
|
See what SuperSkids™ Brand Landing Gear can do for your micro helicopter:
|
- Makes your landing gear almost indestructible.
- Makes your helicopter stronger and more ridged – flies better.
- Allows you to use standard batteries or longer Li-Poly batteries and still be able to balance the helicopter.
- Allows better routing of the antenna with the included antenna tube - less radio interference.
- "Tail Saver" bead helps eliminate broken tail struts.
- Pays for itself in stock landing gear replacement costs.
- It looks better.
At SuperSkids™ Brand Landing Gear , we use only the highest quality parts and injection molding, and the most advanced engineering technology.
|
reviews
"Jeremy Z of RC Group reviews a set of Authentic SuperSkids™ Brand Landing Gear
on his fixed-pitch Honeybee. "
- (RCGroup.com Feb 24, 2007)
Detailed Review
RCU introduced SuperSkids™ Brand Landing Gear
RCU introduced SuperGrips |
SuperSkids™ Brand Landing Gear have been tested to fit the following models : Walkera Dragonfly 4, Blade CP&Pro, EF Sabre, HoneyBee FP
HoneyBee CP2, Venom Night Ranger II, Twister, Dynam Hughes 300
Dynam Phoenix CP, Phoenix FP, Exceed Falcon 40 and many others.
not sure if that fits your model, please send us email to
admin@super-skids.com |
|
| SuperSkids™ Brand Landing Gear
|
SuperSkids™ Brand Landing Gear is the leader in landing gear technology.
We use only the highest quality parts and injection molding, and the most advanced engineering technology. The SuperSkids™ Brand Landing Gear kit includes almost unbreakable landing gear and mounts. The tough aluminum alloy landing skids have a beautiful anodized
finish, and there are strong spring steel struts to add support to the tail boom and make your helicopter more rigid. The new battery tray even
accommodates large LiPoly batteries and is fully adjustable so you can set your center of gravity perfectly, and the included antenna tube gives you a better option for routing your antenna. There's also a stylish tail wing and a new, functional vertical tail fin that reinforces the existing carbon fiber tail strut and includes a bead to stop the tail strut from digging into the ground or your floor, greatly reducing the chance of breaking the strut or your tail rotor. You'll spend less time repairing your helicopter and more time flying it. SuperSkids™ Brand Landing Gear includes all this for the amazingly low price of only $24.95, and they'll look great on your helicopter. It's no wonder many of our customers have called SuperSkids™ Brand Landing Gear "The best upgrade you can buy for your micro helicopter."
SLG300SV SuperSkids Landing Gear Same as Black, but with metallic silver landing gear.
VIEW THE SLG300 INSTALLATION MANUAL
VIEW THE SERIES |
 |
 |
|
|
 SuperSkids400™Landing Gear |
| SuperSkids400™ are just what you need for your 400 to 450 size helicopter. The built-in passive suspension is designed to isolate your helicopter's frame from impact forces. Fits Esky HoneyBee King2 and Belt CP, Walkera DF36 and similar 400 size helis, T-rex and similar 450 helis, and some 300 size helicopters.
| SPECIAL PROMOTIONAL PRICE: $14.95 US |
|
 |
VIEW THE SERIES |
 |
|
|
| SuperSkids3D™ |
SuperSkids3D™ are lighter than our regular SuperSkids Landing Gear. They're for Advanced pilots who want to do aggressive, aerobatic flying and are extremely concerned about weight. SuperSkids3D have shorter skids and lighter mounts than regular SuperSkids Landing Gear, and do not include the wing, struts or tail fin. They're available in all black, and black with metallic-silver landing gear.
VIEW THE SERIES |
 |
 |
|
|
| SuperBoom |
|
 SuperBoom is our Titanium alloy tail boom. It's the same Ti alloy commonly used in aerospace engineering. SuperBoom has a nice, polished finish and engraved SuperSkids logo.
Adding the power of Titanium to your micro heli will do more than just make it look good. Ti won't crack and splinter like the stock carbon fiber tail boom, and it's stronger and less apt to bend than aluminum. If you do manage to bend it, the bends are generally more gradual and easier to straighten.
Our SuperBoom is available in 2 models. SB267 is 10 1/2" long (4.95 mm x 267 mm) and generally used on Fixed Pitch (FP) helis like the EF Sabre, Walkera DF4 and helis of similar design. SB305 is 12" long (4.95 mm x 305 mm) and generally used for E-flite, Esky and similar CP helis. For a limited time, SB305 is available in full 5 mm OD for a slightly more secure fit. The stock CF boom is 4.95 mm OD. If you want the SB305 mm version, please specify OD of 4.95mm or 5mm when ordering.
Note: On most helis, SuperBooms are designed to be glued in place with CA or epoxy in the same manner as the stock tail boom. The longer SB305 boom used with SuperSkids Landing Gear and some light batteries may make it harder to get a good fore/aft balance, especially when used with aftermarket tail housing assemblies. If you need to trim (shorten) the boom for better weight distribution, be careful not to make it so short that you have main and tail rotor collisions. Trimming the boom in these cases is the customer's responsibility, not ours. SuperBooms are a stand-alone product designed to work on stock helicopters.
Installation:
On some helicopters, the boom is secured to the frame and tail housing with set screws. On others, it's glued in with CA glue. We recommend securing your SuperBoom in the same manner that the stock tail boom was secured (screws or CA). The set screw installation is easy. If your boom was secured with CA, you may be able to remove it by using a liquid CA debonder (made by several companies). If the debonder is not effective, you can use a new frame and tail housing, or click here for details .
| PRICE: $14.95 US |
|
|
|
|
|
|
|
| Spare parts for SuperSkids™ Brand Landing Gear |
Now you can buy any of the parts of the SuperSkids™ Brand Landing Gear .
Step:
- Download the part list and order form
- Enter the number of kit you need for each part
- Get the total amount from the order form, if it is for example $17.5, enter 18 into the quantity of your order on the web site
- Get the order number from the e-commerce, send your order form to us at orders@act-labs.com and quote ACT LABS Spare part order #xxxxx on the subject
- Order will be processed as normal, you can combine with other products in the same order
|
|
|
|
| SuperGrips |
| 
SuperGrips are landing skid grips that stop your heli from sliding on almost any surface.
SuperGrips are a special silicon formula designed to last a long time even on rough surfaces like asphalt, but give a non-slip grip to carpet, hardwood or vinyl floors; or countertops and glass surfaces. These skid grips are made to fit SuperSkids™ Brand Landing Gear , but also fit Align and other brand landing skids. These are small and lightweight, but they really grip and they look great. One package includes 4 blue, 4 yellow and 4 black grips. If you like hopping from coffee tables to countertops, you need SuperGrips. -Caution- Only experienced pilots should fly with SuperGrips. Novice pilots should remove SuperGrips before flying. If you land at an angle, your helicopter could tip over more easily with SuperGrips installed.
| SPECIAL PROMOTIONAL PRICE: $4.95 US |
 |
|
|
|
|
| SuperPack |
All of our 7.4v batteries are made as replacements for the stock NiMH,
8.4v, 650mah battery that comes with the helicopter. Check carefully the
size if you have concern. We have listed popular models that we have tested
below. If you have doubt, please email us at admind@super-skids.com
Your micro helicopter is a well engineered product. It's designed to fly in a specific weight range with stock components. The pitch of the blades, throttle curve on your Transmitter, and the tail mixing on your Receiver (4 in 1) are all designed to let you fly at the designed weight with a certain comfort level. On a Fixed Pitch Walkera DF4, for example, if you take off the stock landing gear and add SuperSkids™ Brand Landing Gear landing gear, and take out your stock NiMH battery and add our SP1307A SuperPack, you're only about 5 grams over the stock weight. This is less than the weight of an average sheet of printer paper. You'll get longer flight times with more power when you need it, the looks, strength and benefits of SuperSkids™ Brand Landing Gear landing gear, and your heli will be well within its designed weight specifications. It will still be easy to fly. |
| SP1307A |
|
The SuperPack ™ 1307A is a 7.4 volt Li-Poly battery. It's rated at 1300 mAh and delivers a whopping 18C continuous power. It weighs only 71 grams fully charged (lighter than the stock 8.4v NiMH battery pack). It comes with JST and balance connectors installed. The balance connector lead is long enough to make it easy to charge the battery under any circumstances.
Like all SuperPacks, this one was designed specifically for micro helicopters, with lots of power during the entire charge. Flight times are around 23 minutes, depending on the condition of your helicopter. If you're not sure which battery to chose, this is the one. It's flight characteristics make is suitable for beginners, intermediate and expert pilots.
SP1307A fits the Walkera Dragonfly 4, EF Sabre, Venom Night Ranger2, Esky Honeybee2 FP, Dynam Hughes 300 FP and Phoenix FP, Exceed Falcon 40 and similar micro helicopters that
use a standard 8.4v NiMH battery pack
(86mm x 34mm x 12mm) (3.38" x 1.3" x .47")
| PRICE:$28.95 US |
|
|
|
| SP1307B |
|
The SuperPack ™ 1307B is a 7.4 volt Li-Poly battery. It's rated at 1300 mAh and delivers an incredible 25C continuous power. It weighs only 75 grams fully charged (lighter than the stock 8.4v NiMH battery pack). It comes with JST and balance connectors installed. The balance connector lead is long enough to make it easy to charge the battery under any circumstances.
This battery is ideal for beginners, pilots flying in slightly windy conditions, and for those who are using "hot" upgraded motors. Flight times are around 24 minutes, depending on the condition of your helicopter.
SP1307B fits the Walkera Dragonfly 4, EF Sabre, Venom Night Ranger2, Esky Honeybee2 FP,
Dynam Hughes 300 FP and Phoenix FP, Exceed Falcon 40 and similar micro helicopters that
use a standard 8.4v NiMH battery pack.
(86mm x 34mm x 12.5mm) (3.38" x 1.3" x .49")
| PRICE: $33.95 US |
|
|
|
SP8507 |
|
The SuperPack ™ 8507 is a 7.4 volt Li-Poly battery. It's rated at 850 mAh and delivers 18C continuous power. It weighs only 47 grams fully charged. It comes with JST and balance connectors installed. The balance connector lead is long enough to make it easy to charge the battery under any circumstances.
This battery is a real powerhouse and it's ideal for advanced pilots and aggressive flying, when you want your heli as light as possible. This is not designed for beginners. The light weight and high power of this battery may make it hard for new pilots to control their helicopter's altitude. Flight times are around 15 minutes, depending on the condition of your helicopter.
SP8507 fits the Walkera Dragonfly 4, EF Sabre, Venom Night Ranger2, Esky Honeybee2 FP,
Dynam Hughes 300 FP and Phoenix FP, Exceed Falcon 40 and similar micro helicopters that
use a standard 8.4v NiMH battery pack.
(67mm x 35mm x 9.6mm) (2.64" x 1.38" x .38")
| PRICE: $24.95 US |
|
|
|
SP8511 |
|
 The SuperPack ™ 8511 is an 11.1 volt Li-Poly battery. It's rated at 850 mAh and delivers 18C continuous power. It weighs only 69 grams fully charged and comes with JST and balance connectors installed. The balance connector lead is long enough to make it easy to charge the battery under any circumstances.
This battery is an ideal upgrade for your CP micro heli. It's powerful and light enough for advanced 3D maneuvers. Flight times are around 16 minutes, depending on the condition of your helicopter.
SP8511 fits the Blade CP and CP Pro, Esky Honeybee CP2 and similar micro helicopters that use a standard 9.6v NiMH or 11.1v LiPo battery pack.
(67mm x 35mm x 14mm) (2.64" x 1.38" x .55")
| PRICE:$33.95 US |
|
|
|
|
| LITHIUM POLYMER CHARGER |
|
This E-sky charger will charge both 7.4 volt and 11.1 volt Li-Poly batteries. It's a balance charger, so it charges each cell in the battery pack individually. It has a safe .8 amp output so it won't harm your batteries. When the red LED is on, there is power to the charger. When the green LED is on, it's charging. When the green LED is flashing, it's balancing or topping off the battery. This charger shuts off when the charge is complete. Small and light weight, it's easy to carry anywhere. If you're looking for an inexpensive charger without a lot of bells and whistles; but one that charges your battery as well as any other product, this is the one for you.
(Requires 12V battery or AC adapter - 12 to 15 volts and 1.5 amps or more.)
| PRICE:$16.95 US |
|
|
|
|
|
|
| SuperPad |
SuperPad is based on the latest two mousepads developed by fUnc Industries, Func F-Series Competition Mousing sUrfaces are single-sided, medium size format mouse pads constructed of high quality polycarbonate with exceptional and consistent tracking qualities. U-Series Performance Mousing Surfaces are ultra-thin, ultra-lightweight single-sided mouse pads constructed of high-quality polycarbonate with exceptional and consistent tracking qualities. Both mousing surface incorporates a specially selected, low profile, textured synthetic rubber that exhibits exceptional traction characteristics on a desktop .
VIEW
THE SERIES |
|
|
|
| R/C Telemetry |
|
Black Box
 The Black Box is a sophisticated telemetry recording device with the unique ability to overlay information onto a monitor for OSD (On Screen Display) use when connected to a video source, such as when used with a wireless camera and transmitter.
The Black Box can record on its internal memory, for future playback on a computer and display the following information onto your video monitor:
• Altitude
• Speed
• Power supply voltage
• Radio Receiver voltage
• Engine speed (RPM)
• Metric or Imperial display
• Custom user text (7 characters)
The Black Box also offers superb features such as:
• Plug 'n Play operation
• All cables and hardware in the enlarged photo are included
• Weighs 62g (2.3 Oz)
• Size 50mm ( 1.96 inch) x 84mm ( 3.3 inch) x 23mm (0.9 inch)
• USB connectivity
• User programmable display
You can download from here if you lost the cd
ACT-LABS_BlackBox_Setup
Black Box Manual V1.1
Black Box Customer Feedback
| SPECIAL PROMOTIONAL PRICE: $99.00 USD |
|
MORE DETAILS
OSD Editor
 Simply put, the OSD (On Screen Display) Editor will add up to 224 customized text (characters) onto any video picture when connected to an external video source such as a wireless camera and transmitter.
The video display is split into 6 different “quadrants” which can be user programmed to display full time or at different time intervals!
Key features include:
• 224 Character Display
• Unit Voltage Display
• Radio Receiver Voltage Display
• Timed Display Intervals
• USB Connectivity
• Plug 'n Play operation
• All cables and hardware in the enlarged photo are included
• Weighs 22g (0.8 Oz)
• Size 39mm (1.53 inch) x 68mm (2.68 inch) x 22mm (0.87 inch)
VIEW THE SERIES |
|
|
