Lap after lap,
the ACT LABS RS delivers hardcore wheel-control for your PC and
console racing games. With a responsive racing wheel, F1-style gear
shifters, smooth action pedals and advanced programmability the
ACT LABS RS shifts your driving into high gear!
Our different
RS Engine cartridges plug into your ACT LABS RS for ultimate, cross-platform
racing. The RS is the only cartridge based racing system on the
market. Add different RS Engines and transform your wheel into a
multi-platform racing machine. One wheel for three systems: PC,
PlayStation, Nintendo 64, Dreamcast.
Stay tuned into
ACT LABS because engines for new gaming systems are under development.
How big
is the ACT LABS RS, and will it fit my desk?
The key measurements
are (RS and Force RS):
Top of front
of housing above desk surface: 7.5"
Top of rear of housing above desk surface: 3.5"
Depth (from front edge of desk): 9.75" with Force RS engine or shifter
cartridge or sleeve), 9.25" with RS, PSX engine etc.)
Width: 15" Wheel Diameter: 10.5"
Wheel rim thickness (oval, approximately): 1.75"x1.25"
Clamps (center-center): 9.5" Clamps (width of arm): 1.75"
Desktop underside clearance needed back from front edge of desk:
3"
Desktop underside clearance needed below desk surface: 1.25"
Allowable mounting surface thickness (min-max): 0.75" to 1.75"
|